2026-08-18
A: The standard stamped C057 and C058 clips use 1.5 mm Chinese Grade 50 carbon steel. Heat treatment gives the clips spring action and a specified hardness of 42–46 HRC. Confirm the material, thickness and hardness separately for other models and custom designs.
A: The standard C057 and C058 finish options are zinc plating at 5 µm minimum and electrophoretic coating (e-coat) at 25 µm minimum. Confirm the coating process and color when ordering. Powder-coated and custom versions have their own finish specifications.
For a salt-spray requirement, agree the test method, exposure duration, specimen condition and acceptance criteria before testing. Neutral salt spray (NSS) under ISO 9227 can be specified for the selected finish. The applicable report should identify the clip model, coating type and thickness, tested duration, and acceptance criteria for white corrosion or red rust as applicable.
Confirm any salt-spray hour rating from the report for the selected model and finish. Assess sea-shipment protection separately based on the packaging, humidity, salt exposure and condition of the coating.
A: Clamping performance depends on the clip model, panel thickness, joint geometry and packed load. Share the crate drawing and handling requirements so the selected clip can be checked on the actual assembly. Agree any load or vibration test for that assembly before placing a bulk order.
Example of clip construction.
![]()
A: Use the model table to select a starting point, then check the panel edge profile and joint drawing.
| Specification | C057 | C058 |
|---|---|---|
| Compatible panel thickness | 13 mm | 8 mm |
| Clip width | 50 mm | 35 mm |
| Steel thickness | 1.5 mm | 1.5 mm |
| Drawing profile dimensions | 105 mm and 92 mm | 71 mm and 63 mm |
| Reference unit weight | 135 g | 68 g |
| Material | Chinese Grade 50 carbon steel | Chinese Grade 50 carbon steel |
| Heat-treated hardness | 42–46 HRC | 42–46 HRC |
The drawing profile dimensions refer to the labeled features on each model drawing. OEM dimensions and tooling can be reviewed against your CAD drawing and assembly requirements.
A: For standard stock sizes, our MOQ is 1 pcs. For custom sizes, colors, or specialized stamping requirements, the MOQ is typically 1000 pcs per batch.
A: Yes, we provide free samples for quality testing. You only need to cover the international express freight cost (DHL/FedEx/UPS), which will be fully refunded or credited back once your bulk purchase order is confirmed.
A: Sample dispatch takes 1-2 weeks, Standard bulk orders (10,00–50,00 pcs) are produced within 20–30 days. International express air delivery takes 5–8 days, while ocean freight takes 20–35 days depending on the destination port.
A: Absolutely. Designed for tool-free or quick-release installation, these clips allow rapid assembly and knockdown of wooden crates, significantly lowering labor costs and enabling eco-friendly crate reuse.
A:Yes, of course. After confirming the order, we can send you a comprehensive material testing report and batch quality inspection report. These documents indicate the performance and grade of the raw materials, their place of origin, Product quality testing records, mechanical performance, etc